Sanmar Pilot Boat PI-16
Sanmar Pilot Boat PI-16
PARTICULARS
| Length (hull) | 16,00 m |
| Length waterline | 14.70 m |
| Beam overall | 5.40 m |
| Beam (hull) | 4.77 m |
| Draught, (approx.) | 1.5 m |
| Fuel capacity | 2,590 litres |
| Fresh water capacity | 200 litres |
| Complement | 2 crew + 4 pilots |
| Speed | 20 Knots @ 50% load condition, 100% MCR |
CONSTRUCTION
Hull: Steel, scantlings in accordance with BV requirements,
Deck: Steel, scantlings in accordance with BV requirements.
Superstructure: Aluminium, scantlings in accordance to RINA requirements.
ACCOMMODATION
Wheelhouse accommodation: Central helm position with marine suspension seating for two crew plus four pilots and L type sofa for 5 persons
Lower accommodation: Galley with sink, microwave, 100L fridge, 100L freezer, settee with table & lockers. WC room with shower.
Fwd of the lower accomodation is the crew accommodation space with four berths and lockers.
DECK FITTINGS/EQUIPMENT
Deck fittings/equipment: Aft transom rungs, engine room ventilation boxes & 2 life
buoys. Deck hatches, handrails, bollards, mast & navigation equipment as indicated in the GA drawing.
FENDERING
Fendering: A foam fendering system is to be fitted around the perimeter of the vessel.
WINDOWS, HATCHES & DOORS
Windows: TSG glass, bonded to the superstructure
Hatches: Deck hatches as indicated in the GA drawing
Doors: Watertight doors in WT bulkheads, spraytight door in aft superstructure bulkhead
MACHINERY & PROPULSION
Main Engines: 2 x 670BHp diesel engines
Gearboxes: 2x Suitable reverse reduction gearboxes
Propulsion: 2x Fixed pitched propellers
Auxiliary: 1 x Genset, suitable for boat load
Exhaust: Wet exhaust system installed with suitable silencers
Cooling: Machinery heat exchanger cooled with seawater piped from hull fittings & strainers Ventilation: Engine room ventilation promoted with suitably sized forced intake & extract fans.
Air-Con: Suitable air-con units fitted to cool wheelhouse & lower accommodation spaces.